Browse all practice questions for the Corrosion In Aviation Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Corrosion In Aviation Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Explain exfoliation corrosion.
  • What is the function of sealants and primers in corrosion prevention?
  • How is ultrasonic thickness gauging used to assess corrosion?
  • What does hydrogen embrittlement cause?
  • Which coating fault is most likely to initiate underlying corrosion on aircraft surfaces?
  • The further an anode is away from a cathode on the galvanic series the ________ the damage.
  • What are common signs of hidden corrosion that visual inspection may miss?
  • What is Alodine (chromate conversion coating) and its purpose?
  • What is the impact of corrosion on aircraft weight and performance?
  • Filiform corrosion is characterized by which feature?
  • Which statement correctly reflects the relative effectiveness of wax-type versus solvent-type paint strippers?
  • Which environmental condition most promotes crevice corrosion in aircraft cavities?
  • Which statement correctly matches removal methods to aluminium alloys?
  • What is a corrosion control program and what activities does it include?
  • In a crevice under a gasket in an aircraft joint, which corrosion mechanism is most likely to occur?
  • Which mechanism is characterized by attack along grain boundaries due to heat treatment or impurities?
  • How is corrosion from clad aluminium alloys removed?
  • Which metal type is the worst affected by corrosion?
  • Which practice helps control corrosion in aircraft fuel systems?
  • What is anodizing and how does it improve corrosion resistance in aluminum?
  • Which of the following lists the three methods of non-ferrous metal protection?
  • Which inspection methods are used to detect corrosion in aircraft?
  • Among the eight precautions for removing corrosion by chemical means, which item is NOT listed?
  • Before attempting removal of corrosion, affected areas cleaned of all paints, waxes, greases, oils and other substances using which mild solvent?
  • What are typical indicators that protective coatings are failing?
  • Which statement about galvanic corrosion is true?
  • Crevice corrosion is driven by which mechanism?
  • What role do structural diagrams and maintenance manuals play in corrosion management?
  • Which safety item should always be available when removing corrosion chemically?
  • What is electroplating?
  • What chemical removal procedure is used to remove corrosion from magnesium alloys?
  • What is a common aesthetic feature of anodized aluminum surfaces?
  • How do you identify corrosion in fasteners and their interfaces in service?
  • What are corrosion allowances?
  • Which environmental conditions increase corrosion risk and shorten inspection intervals?
  • What is uniform etch?
  • When diluting acids, what important precaution should be followed?
  • Which property describes the quality of being capable of being liquefied by heat?
  • What are common environmental sources of corrosion in aviation?
  • What indicates that a corroded aluminum skin area should be replaced rather than repaired?
  • Coatings degrade; what indicators would you look for?
  • What is the purpose of proper surface preparation before coating aircraft surfaces?
  • Name the main corrosion mechanisms relevant to aircraft structures.
  • What is the typical procedure for chemical removal of corrosion on iron and steel?
  • How should sealants be used to prevent dissimilar metal corrosion?
  • Dissimilar metal corrosion in the presence of sealants occurs how and how can it be prevented?
  • What is corrosion in aviation structures?
  • What does corrosion require in terms of electrolyte and contact?
  • What are curing sealants?
  • Which of the following is NOT listed as a common environmental source of corrosion in aviation?
  • What is a sealant used for?
  • What is the primary protective function of zinc chromate primer in aluminum structures?
  • How does the lighting and drainage design influence corrosion risk?
  • Which are the two methods of corrosion removal from ferrous materials?
  • Which property allows deformation and return to original shape after load removal?
  • Which statement about the three sealant categories is correct?
  • Intergranular corrosion primarily attacks which part of a metal?
  • How is corrosion-related fatigue life evaluated?
  • What orders the list of metals in order of their electrical potential?
  • Pitting corrosion forms as localized anodic areas and may be detected by what signs?
  • In aluminum skin repair, what step is performed after removing corrosion to sound metal?
  • In a wax-type paint stripper, what role does the wax play?
  • Why are aluminum alloys particularly vulnerable to corrosion in aircraft?
  • What must be checked after corrosion has been completely removed?
  • What removal method should not be used on magnesium alloys?
  • What is metal spraying?
  • What are the three sealant categories?
  • How can design changes reduce corrosion susceptibility?
  • Solvent-type paint strippers are used in which situations?
  • Sealant mixing is carried out IAW?
  • Which of the following is a required consideration before corrosion removal begins?
  • What method is used to remove corrosion off stainless steel?
  • Which metals are specifically targeted for chemical removal using the phosphoric acid/water mixture?
  • Why must extreme care be taken when inspecting magnesium parts?
  • Control cables are listed among areas needing extra attention for corrosion.
  • What is used to prevent fretting corrosion between contacting metal skin and panels?
  • Which process describes the exposure of a metal surface to a conductive, corrosive medium causing the more active metal to become anodic and the less active metal to become cathodic?
  • Hydrogen embrittlement is a concern for aviation maintenance in which materials?
  • Intergranular corrosion tends to present with what observable by-product behavior?
  • What is used where faying surfaces are being fastened together?
  • What is Parkerising?
  • Which mitigation measure is effective for corrosion in fastener holes?
  • Exfoliation corrosion occurs along grain boundaries and causes which result?
  • Which area is commonly checked for corrosion in aircraft skin assemblies?
  • What are the two principal classifications of alloys?
  • What chemical is used to remove corrosion from titanium?
  • What is fretting corrosion and where does it occur?
  • What is the difference between surface corrosion and structural corrosion in terms of inspection?
  • What does 'H' in an alloy designation stand for?
  • In galvanic protection, which metal is anodic to steel?
  • Which area is identified as requiring extra attention when checking for corrosion?
  • Corrosion fatigue describes fatigue due to which condition?
  • How should moisture be controlled in avionics bays to prevent corrosion?
  • Which alloys are most susceptible to stress corrosion cracking in aviation applications?
  • What are some common faults seen in aviation coatings that can lead to corrosion?
  • What situation can accelerate the rate of corrosion?
  • Travel tags are filled out in accordance with which procedures?
  • Which statement about galvanisation is accurate?
  • Which sealant category is designed to resist solvents, petroleum products and high temperatures after curing?
  • After rinsing in the chemical removal process, how should the item be dried?
  • What corrosion behavior is typical for titanium alloys in aggressive aviation environments?
  • What is the typical sequence for addressing corrosion discovered during inspection?
  • Which of the following statements best describes fretting corrosion protection between skin and panels?
  • What is the wet napkin method?
  • Which nondestructive testing method is used to detect surface cracks or discontinuities using magnetic particles when appropriate?
  • Describe pitting corrosion and its aircraft implications.
  • To evaluate corrosion-related fatigue life, which data are integrated?
  • What is the purpose of corrosion inhibitors in maintenance?
  • Stress corrosion cracking involves which combination?
  • Which statement about surface preparation and coating adhesion is most accurate?
  • What is a typical repair approach when corrosion is found on an aluminum skin?
  • Hydrogen embrittlement is a concern in aviation maintenance?
  • Galvanic corrosion is typically identified by corrosion concentrated at what location?
  • In confined space terminology, what defines a breathing zone?
  • Which statement best describes magnesium alloys in corrosion concerns?
  • To conduct confined entry work, personnel must be what?
  • Why is it important to document corrosion findings and repairs?
  • Galvanic corrosion occurs when dissimilar metals are in contact and an electrolyte is present. How is it usually recognized?
  • The pure aluminium coating provides a dual purpose. What are they?
  • Which factor contributes to corrosion when fasteners are used with dissimilar metals?
  • What is the role of coatings in corrosion prevention?
  • Which manual states the allowable repair limits?
  • What are the two general causes of corrosion?
  • Under what conditions does galvanic corrosion occur in aircraft?
  • Which statement describes the role of the anode and cathode in corrosion?
  • Which statement is true regarding corrosion removal on magnesium alloys?
  • How is corrosion from non-clad aluminium alloys removed?
  • Unlike electro-chemical attack, direct chemical attack changes occur at
  • After the bond between the coating and metal is broken, what does the wax do?
  • Exfoliation corrosion is a form of intergranular corrosion in layered or wrought alloys where what occurs?
  • Which practice helps reduce crevice corrosion risk in aircraft components?
  • What is Parco-Lubrising?
  • Which of the following is a property of metals that enables them to absorb energy by plastic deformation?
  • Wheel wells and landing gear are areas requiring extra attention for corrosion checks.
  • Which statement best describes the protection method for primary airframe structures?
  • What is intergranular corrosion and which alloys are at risk?
  • What are pliable sealants and where are they used?
  • What are the three elements to a wax type paint remover?
  • Direct chemical attack is defined as an attack arising from direct exposure of a bare metal surface to corrosive caustic liquids or gaseous agents.
  • In electro-chemical attack, the material shed by the anode is partially accepted by the cathode.
  • Which of the following is NOT a method of paint remover used in aviation?
  • Filiform corrosion occurs as which feature?
  • What criteria determine whether to repair or replace corroded components?
  • Which corrosion removal method is preferred and why?
  • Microbiological corrosion is promoted by scum forming at the bottom of a fuel tank in contact with metal. Which observation is correct?
  • What is eddy current testing used for in corrosion inspection?
  • How do maintenance manuals promote consistency in inspection and repair?
  • Why is corrosion prevention important for fuel systems?
  • If a large cathode is in contact with a small anode, the resultant corrosion would be...
  • Before attempting corrosion removal, what should be cleaned from affected areas using a mild solvent such as Prepsol or Wax and Grease Remover?
  • Fretting corrosion is caused by which scenario?
  • What are common visual indicators of pitting corrosion?
  • During chemical corrosion removal, why is an adequate supply of clean water always available?
  • Tagging procedures for repaired components are to be carried out IAW what?
  • What methods are commonly used to detect corrosion?
  • What is the role of corrosion inhibitors in avionics electronics?
  • What is the purpose of alloying?
  • Crevice corrosion is caused by which mechanism?
  • Why are fluoride-containing fluids problematic for titanium alloys?
  • What is galvanisation?
  • Fretting corrosion occurs due to which mechanism and where is it commonly observed?
  • What is the dwell time window for the phosphoric acid/water corrosion removal process?
  • Which statement best describes the initial action of a wax-type paint stripper?
  • What is 'slow crack growth' in the context of corrosion-fatigue?
  • When preparing a fuel tank for corrosion removal, which precaution is crucial to follow?
  • What are the three essential elements of a corrosion cell?
  • What are drying sealants and where are they used?
  • How do water and humidity promote corrosion on a modern airframe?
  • Which statement about cathodic protection in aircraft structures is true?
  • Which term describes dulling of the surface due to uniform attack?
  • Check the depth of the repair to determine if it is within the limits specified by the manual. If it is not within repair limits, you must consult which office?
  • During electro-chemical corrosion, which statement best describes the transfer of metal between the anode and cathode?
  • Exfoliation corrosion commonly results in delamination along which feature?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy